This annual seminar hosted by ACIA is designed to provide valuable education programs on concrete topics, and our goal is to continue to give architects and engineers this valuable opportunity even in the midst of a global pandemic.
This year’s event will be split into a 4-hour session on both Tuesday, September 8th and Thursday, September 10th. The online seminars will begin at 1pm each day, providing a possible eight hours of Learning Units or PDHs. (7 LU/HSW and 1 LU) Attendance will be reported to AIA for AIA members and certificates will be sent following the event. If an attendee needs CEU credit for a state other than Alabama, you will need to contact the state’s architecture licensure board before the event to ensure the hours will be accepted.
Attendees must register separately for Day 1 and Day 2.
Schedule for Tuesday, September 8, 2020 1PM – 5PM CST
1PM – 2PM: “Air, Water, and Vapor Barriers: What’s Really Required for Masonry Construction” Jason Thompson P.E., National Concrete Masonry Association – 1LU/HSW or PDH (VBCM2020 – Prov#G240)
2PM – 3PM: “Build with Strength: “Pathway to Resilience” – Tien Peng, National Ready Mix Concrete Association 1LU/HSW or PDH (PTR2020 – Prov#G240)
3PM – 4PM: “Control Joints: Aesthetic Function… Structural Implications” – Jason Thompson P.E., National Concrete Masonry Association – 1LU/HSW or PDH (CJ2020 – Prov#G240)
4PM – 5PM: “Incorporating Fibers in your Ready Mix Concrete Design” – Eric Campbell, FiberForce ABC Polymer Industries – 1LU/HSW or PDH (FIRMC – Prov#G240)
Schedule for Thursday, September 10, 2020 1PM – 5PM CST
1PM – 2PM: “SE2050: Reducing Embodied Carbon Using Concrete” – Scott Campbell P.E., National Ready Mix Concrete Association – 1 LU/HSW or PDH (RCUC2020 – Prov# G240)
2PM – 3PM: “BIMS Solutions for Masonry” – Mike Riva, SDiQ – 1 LU (CM-6100 – Prov#T192)
3PM – 4PM: “Understanding Concrete Temperatures and Impacts on Strength” Dale Gillham, Exact Technologies – 1 LU/HSW or PDH (CTIS2020 – Prov# G240 )
4PM – 5PM: “Specification Strategies to Eliminate Concrete Moisture” Dean Craft, ISE Logik – 1 LU/HSW or PDH (ISL03H – Prov# 404108239)
*For any questions, please contact our office at (334) 265-0501